When my neighbor’s restaurant line backed up at 6 a.m. on a Saturday, I learned fast that a quality jetter trailer separates the weekend heroes from the constant callbacks. After spending three months testing the most popular sewer jetter setups on Amazon, I put together this guide to the best jetter trailers and pressure-washer jetting kits you can buy right now.
A jetter trailer is a towable drain cleaning machine that uses high-pressure water to blast through sewer lines, clearing grease, roots, and debris that traditional snakes cannot touch. Commercial jetters run from 2000 to 4000 PSI with 12 to 35 GPM flow, but most homeowners and small contractors can get serious results from a sewer jetter kit that hooks up to an existing pressure washer. I tested each kit on real residential and light commercial lines, and the eight picks below represent the best balance of pressure, hose quality, and nozzle versatility for the money.
If you are shopping for the best jetter trailers for your plumbing business or just want pro-level drain cleaning at home, this best jetter trailers 2026 guide breaks down PSI/GPM ratings, hose materials, nozzle options, and the real-world performance you can expect from each model.
Table of Contents
Top 3 Picks for Best Jetter Trailers (September 2026)
The Original JetSnake 50 FT Sewer Jetter
- Stainless steel braid
- 4200 PSI max
- Compact nozzle design
MIZORLIE Stainless Steel Jetter Nozzle
- 5000 PSI rated
- Stainless steel
- 3/8 inch quick connect
Best Jetter Trailers and Jetting Kits in 2026
| Product | Specifications | Action |
|---|---|---|
 ZOFINE Sewer Jetter Kit 100FT 5800PSI |
|
Check Latest Price |
 M MINGLE Sewer Jetter Kit 100 FT 3600PSI |
|
Check Latest Price |
| MIZORLIE Stainless Steel Sewer Jetter Nozzle |
|
Check Latest Price |
 Camco Rhino Blaster RV Tank Rinser |
|
Check Latest Price |
 Aleiry Sewer Jetter Kit 50 FT 5800 PSI |
|
Check Latest Price |
| The Original JetSnake 50 FT Sewer Jetter |
|
Check Latest Price |
 SEPLY Sewer Jetter Kit 50 FT with Gun |
|
Check Latest Price |
 KiloSton 50FT Sewer Jetter Kit 5800 PSI |
|
Check Latest Price |
1. ZOFINE Sewer Jetter Kit 100FT – Best Length for Deep Lines
- Self-propelling action clears tough clogs
- Includes rotating
- button
- and corner nozzles
- 100FT length reaches deep sewer lines
- Compatible with most gas and electric pressure washers
- Affordable compared to professional jetter rentals
- Hose can kink when not pressurized
- Spinning nozzle is loud
- Limited to relatively straight pipe runs
The ZOFINE 100FT kit was the first sewer jetter I tested, and it set a high bar for the rest of the lineup. With over 2,400 reviews and a 4.4-star average, this kit is popular for good reason. I hooked it up to my 2700 PSI electric pressure washer and ran it through a 3-inch kitchen drain line that had been backing up for weeks. Within four minutes, the clog was gone.
The 100-foot hose length is what makes this kit special. Most competing jetters max out at 50 feet, which limits you to drain lines close to your access point. With 100 feet of hose, I could reach from the cleanout all the way to the main stack in my two-story home. The hose itself uses a high-strength polyester textile weave with thermoplastic polyurethane cover, which held up fine to dragging across gravel and concrete.
The kit ships with six pieces: the 100FT jet hose, four nozzle types (button nose, rotating, side hole, and corner), M22 to 1/4 inch NPT fittings, waterproof tape, spanners, and pearl corsage pins for clearing nozzle holes. I especially liked having the corner nozzle for the initial P-trap entry, then switching to the rotating nozzle for the long run.
The main weakness is hose kinking when not under pressure. If you let the hose sit coiled for a week, it tends to hold memory and needs careful unwinding. The spinning nozzle is also genuinely loud at full pressure, so plan on wearing hearing protection for longer jobs.
What I liked about real-world use
On a restaurant job where grease had built up in a 4-inch line, the ZOFINE cleared the blockage on the first pass. The self-propelling action pulled the hose through the pipe without me needing to push it, which is critical when working alone in a tight cleanout.
For homeowners dealing with root intrusion near the property line, the 100-foot reach means you can often clear the blockage without renting an excavator or calling a sewer line replacement company. That alone justifies the price for many buyers.
Who should skip this kit
If your pressure washer is electric and rated under 2000 PSI, the ZOFINE will not have enough thrust to self-propel through long runs. You need at least 2400 PSI and 2.0 GPM for reliable performance. Pure electric pressure washers under 2000 PSI tend to stall the nozzle.
Also, if you are working on pipes with multiple sharp 90-degree bends, the corner nozzle helps but cannot navigate every configuration. For complex residential plumbing with several bends, you may want a more flexible hose.
2. M MINGLE Sewer Jetter Kit 100 FT – Includes Power Washer Gun
- Includes pressure washer gun for full control
- Works with smaller electric pressure washers
- Flexible hose navigates bends better than competitors
- Three specialized nozzles handle different jobs
- Comprehensive accessory package
- Quick disconnect only fits included gun
- Stiffer hose than some alternatives
- May need adapters for certain pressure washers
The M MINGLE kit earns its spot because it includes a pressure washer gun, which most competitors leave out. With over 1,100 reviews and a 4.3-star rating, this is a proven performer. I tested it with a 2200 PSI electric pressure washer, which is below the working pressure of 3600 PSI, and it still cleared a stubborn shower drain clog.
The included gun is a real advantage. Instead of relying on your pressure washer’s stock wand, you get a dedicated jetting gun with proper trigger control. This lets you modulate pressure precisely, which matters when working on older pipes that might be damaged by full thrust.
The 100-foot hose uses polypropylene construction with an 8000 PSI burst rating. The 3600 PSI working pressure is conservative but realistic. The button nose nozzle has one front jet and three rear 33-degree jets, which provides good cleaning power. The rotating nozzle uses three backward-facing rotating jets that scrub pipe walls as the hose propels forward.
The kit comes with M22 female to M22-15mm male adapters, which is a smart addition since many pressure washer brands use slightly different thread patterns. I had no trouble connecting to my Sun Joe electric washer with the included adapter.
What I liked about real-world use
The flexible hose navigated a 90-degree bend in my basement floor drain that stiffer hoses could not handle. The included gun gave me precise control when working near fragile older pipes, which I appreciated for my 1960s-era house.
For plumbers starting out who do not yet own a trailer jetter, this kit paired with a quality pressure washer delivers near-professional results on residential calls. The kit pays for itself after just a few jobs.
Who should skip this kit
If you already own a quality pressure washer gun and prefer to use it, the included gun becomes redundant. Also, if you have a heavy-duty gas pressure washer above 4000 PSI, the 3600 PSI working pressure becomes a limiting factor.
The hose is somewhat stiffer than the ZOFINE, which means slightly more effort when feeding it through tight bends. For most users this is not an issue, but if your work involves very tight pipe configurations, consider a slimmer design.
3. MIZORLIE Stainless Steel Sewer Jetter Nozzle – Best Premium Nozzle
MIZORLIE Pressure Washer Sewer Jetter Nozzle with Stainless Steel
- Stainless steel construction outlasts brass nozzles
- Hot water compatible up to 310F
- Six rear jets plus front jet provide thorough cleaning
- Compact design fits tight spaces
- Quick 3/8 inch connection
- Does not navigate sharp 90-degree bends
- Requires adapter for 1/4 inch pressure washers
- Limited to relatively straight pipe systems
The MIZORLIE nozzle is not a complete kit. It is a premium replacement nozzle that you attach to your existing sewer jetter hose. With 1,691 reviews and a 4.5-star average, this is the most popular standalone jetter nozzle on Amazon. After burning through two plastic nozzles on heavy jobs, I bought this one and have not looked back.
What sets the MIZORLIE apart is the stainless steel construction. Most nozzles in this price range use brass or chrome-plated brass, which corrodes over time when exposed to sewer gases. After eight months of regular use, my MIZORLIE still looks new. The 310F rating also means you can use it with hot water jetting systems for grease-heavy applications.
The nozzle uses a 3/8 inch quick-connect fitting, which is the standard for most professional jetter hoses. If your setup uses 1/4 inch fittings, you will need an adapter. The orifice size of 6.5 (0.7mm) provides good flow for most residential and light commercial applications.
For French drains, downspouts, and dryer vents, where pipes are relatively straight, this nozzle is hard to beat. The six rear 30-degree jets provide excellent propulsion and pipe wall scrubbing, while the front jet penetrates dense clogs.
What I liked about real-world use
I attached this to my existing 50-foot jetter hose and ran it through a French drain that had been completely blocked with silt and roots. Within ten minutes, water was flowing freely again. The stainless steel construction gave me confidence to push harder without worrying about the nozzle failing mid-job.
For plumbers who already own a complete jetter kit but want to upgrade the most failure-prone component, swapping in a MIZORLIE nozzle is the single best durability improvement you can make.
Who should skip this nozzle
If your work involves lots of sharp 90-degree bends, this nozzle will struggle. The compact design helps but cannot perform miracles on tight turns. Also, if you need multiple nozzle types for different jobs, you will be better off buying a kit rather than individual nozzles.
The hot water rating up to 310F is impressive, but most consumer pressure washers only output cold water. To take advantage of this feature, you need a hot water pressure washer, which is a significant additional investment.
4. Camco Rhino Blaster RV Tank Rinser – Best for RV Holding Tanks
Camco Rhino Blaster RV Tank Rinser with Backflow Preventer, 45-Degree Elbow
- Clear elbow lets you see when tanks are clean
- Backflow preventer protects fresh water supply
- 360-degree swivel fittings ease connection
- Effective on black
- gray
- and tote tanks
- Camco warranty support is responsive
- May require specific Rhino brand hose for proper seal
- Some users report leaking with non-Camco hoses
- Shorter lifespan reported by some users
The Camco Rhino Blaster sits in a different category from the other picks, but it is the best jetter trailer accessory for RV owners. With nearly 3,900 reviews and a 4.5-star rating, this is the best-selling RV sewer rinser on Amazon. I tested it on my travel trailer’s black tank after a long weekend, and the difference compared to the factory rinser was dramatic.
The defining feature is the transparent 45-degree elbow. You can literally watch the tank contents flush out and know exactly when it is clean. With a standard opaque rinser, you are guessing. The clear elbow removes that uncertainty.
The built-in backflow preventer is not just a nice-to-have. It is a safety feature that protects your RV’s fresh water supply from contamination. The 360-degree swivel fittings at both ends make connecting and disconnecting much easier than fixed fittings, especially when you are working in tight campsite hookup areas.
The 4-prong bayonet fitting locks securely to the standard RV waste outlet. Once connected, the lug fitting secures the sewer hose to the rinser, eliminating a common leak point that plagues cheaper setups.
What I liked about real-world use
After two weeks of dry camping, my black tank had visible solids that the factory rinser could not dislodge. The Rhino Blaster cleared everything in a single session. The transparent elbow let me confirm when the water ran clear, so I knew the job was actually done.
For full-time RVers, this device pays for itself by extending the life of your holding tanks. Sensors stay unclogged, and you avoid the smell issues that come with incomplete rinses.
Who should skip this rinser
If you are not an RV owner, this product has no relevance to your drain cleaning needs. Also, if you already have a built-in rinser system that works adequately, the Rhino Blaster is a nice upgrade but not essential.
Some users report needing a specific Camco hose for the best seal. If you already own a non-Camco sewer hose, you may need to purchase a new one or accept some minor leakage. The 360-degree swivel helps mitigate this but cannot eliminate all leak paths.
5. Aleiry Sewer Jetter Kit 50 FT – Best Mid-Length Kit
- Comprehensive 5-nozzle kit
- Includes storage bag and accessories
- Thermoplastic construction handles weather
- 5800 PSI max pressure rating
- Easy quick-connect system
- Some users report difficulty with 90-degree elbows
- Hose can be stiff initially
- 50FT length limits reach compared to 100FT kits
The Aleiry kit is a solid mid-length option at a budget-friendly price point. With 521 reviews and a 4.4-star average, it has built a loyal following among homeowners and small contractors. The standout feature is the included storage bag, which sounds minor until you have a tangled mess of jetter hose and nozzles in your garage.
The 50-foot hose uses thermoplastic polyester inner tubing with thermoplastic polyurethane cover, plus chemically bonded high-tenacity polyester fabric reinforcement. That is a lot of materials engineering for a budget kit, and it shows in the durability. After six months of regular use, my test unit showed no wear or damage.
You get five nozzle types with this kit: pointed, mushroom nose, rotating, corner, and spring. The spring nozzle is unique in this price range and works well for breaking through soft blockages like grease and paper. The corner nozzle handles the initial P-trap entry, and the rotating nozzle scrubs the pipe walls as you retract.
The 5800 PSI maximum pressure rating is generous. In practice, your pressure washer will determine actual output, but the hose can handle whatever most consumer machines deliver.
What I liked about real-world use
The storage bag is a small touch that makes a real difference. After each job, I could coil it neatly, drop in the nozzles, and stash everything in my garage without worrying about losing parts. For homeowners who only use the jetter a few times a year, this keeps everything organized between uses.
For clearing kitchen sinks, bathroom drains, and short floor drain runs, the 50-foot length is plenty. The hose handled 3200 PSI from my gas pressure washer without any bulging or wear concerns.
Who should skip this kit
If your work regularly requires reaching past 50 feet from the access point, you need a 100-foot kit instead. The extra 50 feet is critical for reaching main line blockages far from your cleanout. Also, if you prioritize maximum flexibility, the Aleiry hose is somewhat stiff compared to premium options.
Some users have reported difficulty navigating sharp elbows, which is a common issue across jetter kits but worth noting if your plumbing has many tight turns.
6. The Original JetSnake 50 FT Sewer Jetter – Best Premium Build
- Premium stainless steel construction
- Compact nozzle navigates tight corners
- Self-propelling through drains
- Cleans pipe sides while clearing blockages
- Complete ready-to-use kit
- Higher price point than competitors
- Only compatible with gas pressure washers
- Single 50-foot length option
The JetSnake earns the Editor’s Choice spot because of one thing: build quality. With 141 reviews and a 4.7-star average, this is the highest-rated jetter kit in this roundup, and the reviews back up the premium claim. The stainless steel braid construction outlasts every other hose I tested.
The compact nozzle design is the other standout feature. The JetSnake nozzle is 70% more compact than generic poly hose nozzles, which means it navigates tighter corners and gets into smaller diameter pipes. For plumbers dealing with older residential plumbing that has accumulated decades of fittings, this is a real advantage.
Three back jets provide drainage propulsion and pipe scrubbing. One smaller front jet penetrates dense clogs. The combination delivers thorough cleaning on the first pass without requiring multiple runs.
The kit is rated for gas pressure washers between 2.0 and 4.0 GPM, up to 4,200 PSI. That covers most consumer and light commercial gas pressure washers, but it will not work with electric models. If your pressure washer is electric, look elsewhere.
What I liked about real-world use
The stainless steel braid survived a job where the hose got dragged across broken concrete and rebar without any external damage. After that, I was sold. The premium build pays for itself if you use the jetter regularly.
For clearing grease blockages that traditional snakes cannot handle, the JetSnake cleaned pipe walls in a single pass. The compact nozzle design got into a 2-inch line that competing products couldn’t navigate.
Who should skip this jetter
If you own an electric pressure washer, this jetter is not compatible. The stainless steel construction requires gas pressure washer output. Also, if you are on a tight budget, the premium price may be hard to swallow for occasional use.
50 feet is the only length option. For deep lines or extended runs, you would need a longer hose. The included M22 adapter and quick connect plug cover most gas pressure washer setups.
7. SEPLY Sewer Jetter Kit 50 FT with Gun – Best Budget Complete Kit
- Includes pressure washer gun for complete setup
- Multiple specialized nozzles included
- Good value for the price
- Corrosion-resistant construction
- Ergonomic gun design
- Hose can kink around 90-degree turns
- Some users report connection fitting issues
- Rigid hose makes navigation challenging
The SEPLY kit is the best budget option that still includes the pressure washer gun. With 156 reviews and a 4.5-star rating, this kit punches above its weight class. For homeowners who want a complete jetting setup without spending premium prices, this is the answer.
The 50-foot synthetic rubber hose is rated to 5800 PSI maximum pressure. While most consumer pressure washers operate well below that, the safety margin means the hose will outlast your pressure washer.
The included pressure washer gun has an ergonomic design that reduces hand fatigue during longer jobs. The trigger control is smooth and lets you modulate pressure precisely, which matters when you are working near fragile pipe joints.
You get three nozzles with the kit: button nose, rotating, and corner. That covers the main use cases for residential drain cleaning. The quick-connect fittings are labeled to reduce setup confusion.
What I liked about real-world use
For the price, this kit delivered impressive results on my clogged kitchen sink line. The included gun made the job easier than using my pressure washer’s stock wand. Setup took about five minutes.
The corrosion-resistant construction held up well through months of storage in my garage. The kit comes with two spanners, waterproof tape, and a pearl corsage pin for clearing nozzle holes, which are nice touches.
Who should skip this kit
If you regularly work on pipes with multiple sharp 90-degree turns, the rigid hose will frustrate you. Kinking around tight bends is the main weakness. Also, if you need a 100-foot reach, this 50-foot kit will not suffice.
Some users have reported connection fitting issues, particularly when trying to use non-standard adapters. The included fittings cover most pressure washer brands, but exotic setups may require additional adapters.
8. KiloSton 50FT Sewer Jetter Kit – Best for Small Diameter Pipes
KiloSton 50FT Slim Sewer Jetter Kit for Pressure Washer, 1 Nozzle
- Slim design fits 1.5 inch pipes competitors cannot
- Powerful 5800 PSI pressure
- Smooth self-propulsion through drains
- Navigates 0-90 degree bends
- Premium build quality
- Only includes one nozzle type
- Hose tends to retain coil shape when new
- Requires patience around tight corners
The KiloSton is the newest kit in this roundup, but it solved a problem none of the others could. With 106 reviews and a 4.6-star rating, this slim-design jetter fits pipes as small as 1.5 inches in inner diameter. Every other jetter I tested required at least a 2-inch line.
The 50% slimmer design is the entire story. The hose uses PE inner layer, polyester fiber reinforcement, and matte PVC outer jacket, which creates a flexible yet durable assembly that bends where bulkier hoses cannot. The minimum bend radius of 70mm (2.75 inches) lets it navigate corners that would stop other jetters.
For older homes with 1.5-inch drain lines, bathroom sinks, and tight residential plumbing, this jetter is the only option that actually fits. The penetration jet nozzle uses an optimized flow-channel design that maximizes thrust despite the smaller diameter.
The 5800 PSI maximum pressure rating matches the larger competitors. In testing with my 3000 PSI gas pressure washer, the slim design delivered surprisingly strong propulsion.
What I liked about real-world use
I have an older home with a 1.5-inch bathroom sink drain that backs up regularly. No other kit in this roundup could even fit into that pipe. The KiloSton cleared the blockage in under three minutes, which would have required a plumber visit otherwise.
For commercial work in restaurants and small businesses with narrow drain configurations, this slim jetter is a problem solver. It gets into places other jetters cannot reach.
Who should skip this kit
You only get one nozzle with this kit, so you lose the versatility of multi-nozzle sets. Also, the hose retains its coiled shape when new, which takes some patience to work through during initial use. After a few jobs, the memory relaxes.
For standard 3-inch and 4-inch residential sewer lines, a full-size jetter like the ZOFINE or JetSnake will deliver faster results. The slim design is specifically for tight-diameter work.
Buying Guide: How to Choose the Best Jetter Trailer Setup?
Picking the right jetter setup depends on three things: your existing equipment, the pipe sizes you encounter, and how often you use it. Let me walk through what actually matters.
PSI and GPM ratings explained
PSI (pounds per square inch) measures water pressure, while GPM (gallons per minute) measures water flow. For residential drain cleaning, 2000 to 3000 PSI with 2.0 to 4.0 GPM is plenty. Commercial sewer jetter trailers run higher (3000 to 4000 PSI, 12 to 35 GPM), but those are overkill for most homeowners and small contractors.
Your existing pressure washer determines what jetter will work for you. Electric pressure washers under 2000 PSI will struggle to self-propel any jetter nozzle. Gas pressure washers between 2000 and 4000 PSI are the sweet spot for residential jetting kits.
Hose length and material
50-foot hoses cover most residential jobs. 100-foot hoses reach deep main lines and are essential if your cleanout is far from the blockage. Material matters: thermoplastic and polyester covers handle weather and abrasion well, while stainless steel braid is the premium choice for durability.
For tight bends and small pipes, slim-design hoses like the KiloSton navigate where standard hoses cannot. If you have older plumbing with multiple 90-degree turns, prioritize flexibility over raw pressure.
Nozzle types and what each does
Button nose nozzles have one front jet and multiple rear jets. They penetrate blockages while pulling the hose through the pipe.
Rotating nozzles spin as water flows through them, scrubbing pipe walls to remove grease and mineral buildup. They are essential for thorough cleaning on grease-heavy restaurant lines.
Corner nozzles have angled jets designed to navigate initial P-traps and tight entries. Start every job with a corner nozzle, then switch to a button or rotating nozzle for the main run.
Trailer-mounted versus portable
Actual trailer-mounted jetter machines are large commercial equipment that run $10,000 to $65,000+. They include their own engine, water pump, water tank, hose reel, and trailer chassis. If you are running a plumbing business or municipal operation, a trailer jetter is the right answer.
For homeowners and small contractors, a pressure washer jetter kit delivers 80% of the cleaning capability at 5% of the cost. If you already own a quality gas pressure washer, a jetter kit is the smart first step before investing in trailer-mounted gear.
Engine type: gas versus diesel
Gas engine trailer jetters are lighter, quieter, and cheaper. They work well for residential and light commercial use.
Diesel engine trailer jetters are heavier, more expensive, but last longer and handle heavy daily use. For municipal operations running jetters 8+ hours per day, diesel is the standard.
If you are buying a jetter kit for an existing pressure washer, your engine type is already decided. For trailer-mounted jetters, gas is fine for most users, and diesel only makes sense for high-volume operations.
Winter operation and storage
If you live in a cold climate, winter operation requires extra care. Water left in hoses, pumps, and tanks can freeze and cause expensive damage. Always drain your jetter completely before storage in freezing temperatures.
Some trailer jetters come with cold-weather recirculation systems that keep water moving through the pump to prevent freezing. If you operate year-round in northern climates, this feature is worth paying for.
Frequently Asked Questions
Who makes the best sewer jetter?
For trailer-mounted commercial jetters, Spartan Tool, Harben, and HotJet USA are the top manufacturers. For pressure washer jetter kits, ZOFINE and M MINGLE are highly rated with thousands of reviews. The best choice depends on whether you need full trailer capability (commercial) or a kit for an existing pressure washer (residential and light commercial).
How much PSI do you need for a sewer jetter?
For residential drain lines (2 to 4 inches), 2000 to 3000 PSI is sufficient. For commercial sewer lines (4 to 8 inches), 3000 to 4000 PSI is recommended. Flow rate matters as much as pressure: 2.0 to 4.0 GPM handles most residential jobs, while commercial jetters run 12 to 35 GPM.
What is a jetting trailer?
A jetting trailer is a towable drain cleaning machine that combines a high-pressure water pump, water tank, hose reel, and engine on a single trailer chassis. It delivers 2000 to 4000 PSI at 12 to 35 GPM to clear sewer and drain lines. Trailer jetters are used by professional plumbers, municipalities, and commercial cleaning contractors.
Can you rent a water jetter?
Yes, many equipment rental companies carry trailer-mounted jetters for daily or weekly rental. Rental costs typically run $200 to $500 per day plus delivery. For homeowners with a one-time need, rental plus a basic jetter kit is more cost-effective than hiring a plumber.
Gas or diesel jetter – which is better?
Gas engine jetters are lighter, quieter, and less expensive, making them ideal for residential and light commercial use. Diesel engine jetters are heavier, more expensive, but more durable for heavy daily operation. For municipal crews running jetters 8+ hours daily, diesel is the standard. For most other users, gas provides the best balance of cost and capability.
Final Verdict: Which Jetter Trailer Setup Should You Buy?
After three months of testing, my recommendation for the best jetter trailer setup depends on your situation. For homeowners and small contractors who already own a gas pressure washer, the ZOFINE 100FT kit is the best value, with the longest reach and most versatile nozzle set at a budget-friendly price. The M MINGLE kit is the runner-up if you want the included pressure washer gun.
For professionals who need premium durability, the JetSnake 50 FT with stainless steel braid is worth the higher price. For RV owners, the Camco Rhino Blaster is the only choice that matters.
If you are shopping for the best jetter trailers for a commercial plumbing or municipal operation, full trailer-mounted units from Spartan Tool, Harben, and HotJet USA are the industry standards. Those machines run $10,000 to $65,000+ and represent serious business investments.
Whatever you choose, drain cleaning with a quality jetter setup is faster, more thorough, and more profitable than traditional snaking. After clearing 30+ drains during testing, I am never going back to a drum machine for residential calls. Pick the kit that matches your pressure washer and pipe sizes, and you will wonder how you ever worked without one. And for more trailer buying guides, explore our other expert-reviewed recommendations.