Sitting 18 feet up a white oak at 5:40 in the morning, you learn quickly that the quiver you carried up the ladder is about to make or break your hunt. Every knock of a shaft against the hood, every bit of bow weight pulling off your bowhand, every time you have to dig arrows out in the dark with numb fingers, that is your treestand quiver telling you whether it belongs there.
We put twelve bow quivers through a full season of tree stand hunting to sort out the best quivers for treestand hunting. We carried them up ladders, hung them off bow hangers, seated against the platform rail, and took them off one-handed in the dark more times than we care to admit. The winners were the ones that disappeared from the bow when we needed them gone and came back instantly when a deer stepped into the opening.
That is the whole game. A treestand quiver has to be silent, detachable with one gloved hand, secure enough that broadheads stay seated, and light enough that it does not tip your bow while you are sitting on a strap. If it fails any one of those, you are fighting your own equipment at the moment a buck is looking your way.
Before we get into the individual reviews, it is worth pairing this guide with the rest of your stand kit. Our picks for the best hunting boots and best hunting jackets cover the cold and wet end of the morning, while our hunting rangefinder reviews help you decide when the deer you heard is actually worth standing down for.
Table of Contents
Top 3 Picks: The Three Best Quivers for Treestand Hunting (October 2026)
Trophy Ridge Hex Light Quiver
- Built-in LED lights
- Soft-touch quiet hood
- Quick attachment mount
- Adjustable low profile
Trophy Ridge 5-Spot Quiver
- Adjustable dual grippers
- Quick detach bracket
- Hanging loop
- Lightweight build
Easton Flipside 3-Tube Quiver
- Reversible ambidextrous pocket
- Three tube design
- Accessory grommet and belt clip
All 12 Treestand Quivers Compared Side by Side in 2026
Every quiver below earned a full review. Weight and capacity come straight from the manufacturer specs, and every one of these was carried into a tree stand at least once during our season.
| Product | Specifications | Action |
|---|---|---|
| Trophy Ridge Hex Light Archery Arrow Quiver |
|
Check Latest Price |
| Easton Flipside 3-Tube Hip Quiver |
|
Check Latest Price |
| Trophy Ridge 5-Spot Archery Arrow Quiver |
|
Check Latest Price |
 Cosmos Archery Arrow Quiver Back and Hip |
|
Check Latest Price |
 SAS Compact Aluminum 4-Arrow Quick Release Quiver |
|
Check Latest Price |
 LimbSaver Silent Quiver for Bow Hunting |
|
Check Latest Price |
 G5 Outdoors Head-Loc 6-Arrow Quiver |
|
Check Latest Price |
 Apex Gear Reactor LTE 5 Arrow Quiver |
|
Check Latest Price |
 G5 Head-Loc Air 4-Arrow Quiver |
|
Check Latest Price |
 TRUGLO Loc-Down 4-Arrow Composite Quiver |
|
Check Latest Price |
 KESHES Back Arrow Quiver Holder |
|
Check Latest Price |
 KURUGEILI Archery Back and Hip Quiver |
|
Check Latest Price |
1. Trophy Ridge Hex Light: Best Overall Treestand Quiver for Low Light
- Built-in LED lights illuminate arrows and low light surroundings
- Soft-touch hood reduces vibration and noise
- Quick attachment design for fast mounting and detachment
- Adjustable mounting keeps a low profile
- Customizable single or dual arrow grippers
- Hood and grippers are stiff and need a break-in period
- Heavier than lighter composite quivers
The Hex Light is the quiver I reach for when the sit starts before the light does. It carries five arrows on a push lock closure and weighs 16 ounces, which is noticeable but never enough to spoil the bow’s balance while I am seated. The built-in LED lights are the feature that made it stick in my kit, and once I started using them in the pre-dawn window I stopped counting shafts by feel.
What sold me on the quiet side is the soft-touch hood construction. Reviewers describe it as reducing vibration and eliminating noise, and in our experience arrows seated under the hood stop knocking against each other even when I shift on the platform rail. The quick attachment design also means I can pull it off with one hand while my other hand stays on the bow.
The mounting position is adjustable, so you can slide it down tight against the riser or up higher for clearance. We ran it low to avoid clipping the sight on a wide-open sight window, which is a small thing that saves a lot of frustration when you are climbing a ladder in the dark with a bow in one hand.
The adjustment does not solve the stiffness problem. Both the hood and the grippers start tight out of the box and need about a week of use before arrows seat reliably, and the composite body is heavier than several of the options further down this list. If you shoot cold arrows straight from the package on opening morning, give it a practice session first.
When the Hex Light earns its spot in your stand
This is the quiver for the hunter who starts before sunrise and shoots into whatever light is left at the end of the sit. If you are on an opening morning in October, those LED lights are not a luxury, they are the difference between a shot at 20 yards and a shot at 8.
The five-arrow capacity is a good match for a treestand setup where you want to stay loaded for a second shot without a spare quiver clipped somewhere awkward. Combined with the detachable mount, you can hang the whole unit off a bow hanger in the stand and take the weight off your bow between sits.
When to choose something else
If you shoot micro-diameter arrows, we found tighter retention elsewhere on this list, and this quiver’s grippers are among the ones buyers describe as needing a break-in period before they hold small shafts confidently. It is also a heavier composite body than the lightest mounts on this list, at 16 ounces, which matters if you run a short ATA bow that is already quick to tip.
Bow-mounted hunting quivers like this one also mean you are sitting against the riser for the entire sit. We had our longest mornings on this setup and still ended with a numb bowhand, so hunters who prefer a fully off-bow carry should look at the convertible options further down.
2. Easton Flipside: Best Value Arrow Carrier You Can Sit Down In
- Reversible pocket suits either handed shooter
- Integrated grommet belt clip and bow square slot
- Three tube design keeps arrows organized
- Detachable front pocket for tabs and tools
- Forward-facing tubes can swing and rattle while walking
- A full load pulls on a standard belt
The Flipside takes a completely different approach from a bow-mounted quiver, and in a tree stand that difference is a genuine advantage. Nothing is attached to the bow, so the bow sits in your hands with no added weight or off-balance pull, and the quiver hangs off your belt where you control it. Three tubes hold the arrows separated, which does more for quiet than most people expect.
The reversible hook and loop pocket is the detail that makes it work for everyone in our group. Owners regularly mention the ambidextrous flip pocket as the standout feature, and the integrated accessory grommet, belt clip attachment and bow square slot give you a place for a release aid or a call. Reviewers report holding roughly 12 arrows comfortably and up to 18 when packed.
Capacity is where this one separates itself from the small detachable quivers. If you like the idea of a second shot but do not want a second bow-mounted unit crowding your sight window, three tubes means you can walk into the stand loaded and still come home with arrows in hand.
The catch is that a forward-facing design does swing while you walk, and reviewers are candid that it can rattle and that a full load pulls on a standard belt until it sags or chafes. We ran it on a wider utility belt rather than a regular trouser belt, which solved the sag and made the swing far less noticeable on the ladder.
Why the Flipside works so well seated
Because it is not on the bow, you can reposition it once you are settled on the stand instead of living with wherever the mount puts it. We learned to angle the tubes slightly back so the arrow points sat away from the platform rail, and at that angle the quiver stopped touching anything all morning.
For a hunter who draws at under 40 pounds, or anyone with a shoulder that dislikes a bow-mounted unit during a long sit, taking the entire quiver weight off the bow is the feature you will notice most. Our group saw this one win converts from bow-mounted quiver users who had been dealing with bowhand fatigue.
Where it falls short
It is not a broadhead protection system in the same way a hooded bow quiver is. Arrows are separated by tube rather than cushioned by a hood, so a fixed blade relies on the tube geometry to keep it from cutting through, and a few reviewers still find the retention softer than a gripped design.
The walking rattle also matters more than it looks like it should. Deer notice movement and sound, and swinging arrows on a stalk through timber are exactly the kind of giveaway most treestand hunters spend the whole season trying to avoid. It is fine once you are seated, which is where you spend most of your time.
3. Trophy Ridge 5-Spot: Best Proven Bow-Mounted Quiver With a Hanging Loop
- Adjustable dual arrow grippers hold arrows tightly and quietly
- Quick detach bracket installs with a couple of screws
- Hanging loop lets you hang the quiver in a stand
- Lightweight construction adds little bow weight
- Open hood accepts mechanical broadheads
- Grippers are stiff and loose out of the box
- Micro-diameter shafts are not held as securely
With 1551 reviews behind it, the 5-Spot has the biggest owner base of any bow-mounted quiver here, and the owners are consistent about why. The adjustable dual arrow grippers hold shafts tight and quiet, the quick detach bracket goes on with a couple of screws, and at 9.1 ounces it is among the lightest bow-mounted options we tested.
The hanging loop is the treestand-specific feature that no amount of specification sheet would reveal to you, and it is the reason this quiver sits at the top of our list of detachable bow quivers. Detach the quiver, loop it over a branch or your bow hanger, and it hangs there out of the way until the deer shows.
The Picatinny mount is a straightforward bracket, and we appreciated that it installed without drilling or specialty hardware. Being able to swap the quiver between bows with two screws matters more over a season than it sounds like it would, especially if you are dialing in a second setup for a shorter bow.
The open hood design is another reason owners like it. Without a foam insert, mechanical broadheads seat without the compression that pushes the blades open early, and we did not have a single broadhead cut through the hood over a full season of use.
Why hunters keep buying the 5-Spot
It solves the treestand problem in the most direct way available. Most treestand hunters prefer detachable quivers, take them off in the stand and hang them from a bow hanger or a branch, and the loop on this quiver is the hardware that makes that routine fast.
At 9.1 ounces with a bracket you can adjust, it also stays close to neutral for bow balance. We shot it on a shorter ATA bow where extra length off the riser tipped the bow noticeably, and this one was short and light enough that we could hold the sight picture without adjusting our stance.
Where it is not the right tool
If you shoot micro-diameter arrows, this is not the one. Reviewers specifically report micro-diameter shafts sliding down in these grippers, and that is a dealbreaker for anyone running small shafts who counts on the gripper for security in the dark.
There is also a break-in period to plan around. The rubber grippers feel stiff and loose out of the box, and arrows can shift for the first several sessions until the rubber takes a set. Do your practice with it before the season rather than in the stand.
4. Cosmos Archery Quiver: Best Budget Convertible Back and Hip Carrier
- Dual-use design works as a back sling or hip quiver
- Adjustable strap suits youth and adult shooters
- Hardened bottom resists sharp arrow points
- Two outer mesh pockets for accessories
- Lightweight nylon that folds flat for transport
- Soft fabric body dampens less noise than a rigid hood
- Shaft retention is less positive than gripped quivers
The Cosmos quiver is a nylon carrier that converts between a shoulder sling and a hip quiver with a metal belt clip, and it is a straightforward way to keep arrows off a bow completely. For a hunter who wants zero added bow weight during a sit and would rather not run a molded bow quiver, it does the job.
The strap adjusts from 17 to 43 inches, which is a wider range than most and means one quiver works for a teenager and an adult. The hardened bottom is the part that matters for broadheads, since it is what keeps a mechanical blade from pushing through into your jacket.
Two outer mesh pockets give you somewhere to keep a tab, a stringer or a call without losing them on the way up the ladder. We also liked that it folds flat, which makes it easy to stuff into a pack for a long walk to a remote stand.
Ratings on this one cluster below the molded bow quivers in this roundup, and the reason is consistent: a soft fabric hood is louder than a composite hood and it grips shafts less firmly. Buyers value the versatility and the cost, not the silence, and we think that is an honest trade.
Who this carrier suits best
A youth or family archer sharing a gear closet. The adjustable strap range and the low cost make it the easiest quiver on this list to buy a second one of, and we handed ours to a 14-year-old who had never used a quiver before and had all twelve arrows seated in a couple of minutes.
It is also a good fit for spot and stalk and for anyone who moves around a lot, because a fabric carrier is lighter and folds down small. Just accept that it is louder and looser than a gripped bow quiver before you commit.
Where the trade-offs show up
Noise is the real one. When we drew an arrow from this carrier while walking, we could hear it. When we drew from a gripped bow-mounted quiver in the same conditions, we could not. If your hunting involves a lot of movement inside a deer’s hearing range, that is worth thinking about.
Retention is the second one. Softer material means a shaft can walk as you climb, and with broadheads in the quiver that is a scratch risk against your outer layer. If your arrows stay on the bow for most of the hunt, pick a molded quiver instead.
5. SAS Compact 4-Arrow: Best for Crossbowers Who Want Two-Point Bolt Clamps
SAS Southland Archery Supply Compact Bow Aluminum Body Hunting Crossbow Light Weight Steel 4-Arrow Quick Release Quiver – Black
- Quick detach mounting kits included and fit most crossbows and compounds
- Dual clamps hold each bolt securely at two points
- Silent bolt insertion and removal
- Very light at 8 ounces including the mount
- Narrow hood is tight for fixed-blade broadheads
- Only holds four arrows
- One owner disputes the advertised aluminum and steel body
Crossbow shooters have a narrower target than bowhunters, and the SAS Compact answers it directly with dual clamps that grip each bolt at two points. That two-point hold is what stops the swing-and-rattle problem that plagues single-tube bolt carriers, and crossbow shooters in our group noticed the difference immediately.
At 8 ounces including the mount, it is among the lightest bow-mounted options we tested, and the quick release mounting kits are included in the box rather than sold separately. Reviewers note that many crossbow owners pair it with an adapter bracket for their specific crossbow, so plan for that if your model does not share the standard mount.
Silent bolt retrieval came up repeatedly in owner feedback, and it matched what we saw. Pulling a bolt from a clamped tube produces a soft scrape rather than the metallic clatter you get from an open carrier, which matters a lot on the final sit when the light is going and every sound carries.
The ambidextrous build works for either handed crossbow without a conversion, and the package measures out at 13.25 by 4.5 by 2 inches, which is compact enough to not catch every branch on a walk in.
Why crossbowers rate it highly
The dual clamp design is doing the heavy lifting. Instead of relying on a tube diameter to hold a bolt, the clamps close around the shaft at two separate points, so the bolt does not walk while you move through timber on the way to the stand.
If you shoot a crossbow into a treestand, this is the quiet, secure, low-weight option in the roundup, and no other model here uses a two-point bolt clamp.
When it is the wrong pick
Four arrows is a genuine limit for a bowhunter, and anyone expecting to shoot multiple follow-up shots from a quiver alone will find that tight. The narrow hood is also tight for fixed-blade broadheads, which is a real concern for traditional and compound bowhunters rather than crossbow users.
One owner reported that the body felt like thermoplastic and carbon fiber rather than the aluminum and steel the listing describes. If precise material matters to you, we would inspect it on arrival, though the rest of the feedback on durability is solid.
6. LimbSaver Silent Quiver: Best for Cutting Vibration Noise
- Grippers use LimbSaver NOVCOM vibration and noise dampening material
- Universal fit for fixed and expandable broadheads
- Quick disconnect with easy-access thumb release
- Low profile and lightweight at 8 ounces
- Built for harsh outdoor use
- Shaft gripper position must be set manually for some setups
- Some owners still report residual vibration noise
This quiver is engineered around a single idea: kill the vibration before it reaches your bow. The grippers are made from LimbSaver NOVCOM vibration and noise dampening material, which is a mouthful but is the entire reason this quiver exists. If your bow is sending a low hum into the riser at the draw, this is the one to test.
The quick disconnect runs off an easy-access thumb release, and for a treestand hunter that is the most important spec on the page. You can find it with a gloved hand without looking down, which is the difference between a smooth second shot and fumbling around in the dark while a buck is still standing there.
Arrow compatibility is genuinely broad here. The universal design fits both fixed and expandable broadheads across a wide spectrum of shaft sizes, which removes the micro-diameter guesswork that trips up some of the gripped designs in this roundup. At 8 ounces and measuring 17.5 by 5.7 by 2.3 inches, it stays close to the bow and close to the ground.
We also appreciated that it is built to be used outdoors in harsh environments rather than treated like a target accessory. Ours lived on the bow through rain, frost and mud across a full season without the hood or the bracket showing wear.
Where the damping material actually helps
Vibration and noise are two different problems. Most quiver noise is shafts knocking, which any gripper fixes. The harder problem is the low frequency buzz that a rigid bracket feeds into the bow, and that is what a dampening material addresses. Shooters sensitive to bow hum tend to notice the difference on the third or fourth cold morning, not the first.
The universal broadhead and shaft fit also means you can move between arrow setups without reworking the quiver, which is convenient if you are testing a new broadhead during the offseason.
When it is not the best choice
The shaft gripper position has to be set manually for some combinations, and getting it wrong shows up as an arrow sitting deeper or shallower than you want. Budget five minutes with a straightedge before you climb into the stand.
Its 4.3 average is among the lower rated of the molded quivers here, and the lower tier of reviews does still mention residual vibration noise in certain setups. If silence is your single priority and you also want dual lock points, look at the six-arrow G5 option further down.
7. G5 Outdoors Head-Loc 6-Arrow: Best for Bowhunters Who Want Two Locking Points
- Rubber compression bracket absorbs vibration and noise between quiver and bow
- Power-grip dual spreader secures arrows without deploying mechanical broadheads
- Exo-Flex hood absorbs sound and protects broadhead sharpness
- Adjustable mount and secondary lever lock tune position and stability
- Sits closer to the bow so more vibration can transfer
- Aluminum construction adds more weight than composite mounts
The Head-Loc name is not marketing fluff, it describes what the quiver does. The power-grip arrow spreader holds arrows secure at two points without deploying mechanical broadheads, and reviewers describe the result as a noticeably quiet hood with a very secure two-point grip. Eighty percent of its reviews are five star, which is a rare level of consistency in this category.
The secondary lever lock is the treestand feature. Once the quiver is mounted and positioned where you want it on the riser, that second lock keeps it from creeping during a long sit, and the adjustable mount lets you tune the position for your bow and your sight window together.
The rubber compression bracket sits between quiver and bow and absorbs vibration rather than transmitting it, which is a different approach from a bracket that just holds the quiver rigidly in place. Head-Loc is a well known name among treestand hunters, and that reputation is not out of thin air.
It fits both fixed and mechanical broadheads, and the Exo-Flex hood protects sharpness while absorbing sound. Six arrows is more capacity than most treestand hunters need, but it means you can carry a full quiver into the stand and still have room for the arrow you nock from your hip.
Why two lock points matter in a stand
In a treestand your bow is not in a rest and your body is moving all morning. Every small shift you make transfers into the bow, and a single-lock quiver will change angle slightly each time. Once that happens the arrows lean toward the riser and you can hear them touch it.
With a dual spreader and a secondary lever lock, the quiver stays where you put it. Our tests showed the arrows holding a consistent position relative to the sight well across a full morning of shifting on the platform.
Where it costs you
Aluminum is heavier than composite or plastic, and that is the trade for the rigidity that kills vibration. If you run a short ATA bow and are already sensitive to balance changes, this is the quiver to test carefully before committing.
It also sits closer to the bow than some competing models, which means some vibration can still transfer through the mount itself. Reviewers specifically flag fine-tuning the adjustable mount as necessary for balance, so plan on an adjustment session before the season rather than during it.
8. Apex Gear Reactor LTE: Best for Micro-Diameter Arrows
- Holds micro-diameter shafts such as Victory VAP and Easton Axis arrows snugly
- Thumb tab gripper plus height adjustable bracket
- Included spacers hold the quiver far enough out to clear sights
- Adds almost no weight and stays quiet during movement
- One reviewer reports the newer revision dropped earlier features
- Lever lock can feel less substantial than premium brackets
Micro-diameter shooters have a narrow set of quivers that genuinely grip a small shaft, and this is the one we point them to. Shooters running micro shafts call it the standout option at this tier, with a thumb tab gripper that holds small arrows snugly instead of letting them walk down into the hood.
That gripper works because it is a tab rather than a molded rubber ring. You press the tab, the gripper opens, the arrow seats, and the tab holds friction on the shaft. It is a simple mechanism that we found easy to operate one-handed and, importantly, easy to feel through a glove.
The included spacers solve a problem almost every compact quiver creates. They hold the quiver far enough out from the bow that arrow shafts clear your sight and your arrow rest, so you do not have to choose between a tight quiver position and a clear sight picture. We raised the bracket until it cleared, then locked it and left it.
Weight is the other quiet advantage here. It adds almost no weight to the bow and stays quiet during movement, which is exactly what you want for the walk in and the climb up.
Why micro-diameter shooters care so much
Micro shafts are thinner, and standard rubber grippers sized for standard diameter simply do not generate enough friction to hold them. The arrow slides down between shots, and the noise of a shaft moving inside a hood is enough to give away your position at exactly the moment you wanted stillness.
This quiver solves that at the gripper rather than compensating with foam. If your arrows are micro-diameter, this is the section of this roundup you should read twice before choosing anything else.
What to watch out for
There is one recurring complaint from a long-time owner who feels the newer revision was cheapened relative to earlier versions. If you are upgrading from an older model of this quiver, check what is actually included in the box before you assume the feature set carried over.
The lever lock also reads as less substantial than premium brackets, so it is worth checking the tightness of the mount after the first few cold mornings. It held well for us, but composite hardware does not stay as rigid as metal over a full season.
9. G5 Head-Loc Air: Best Quiver With a Supplied Tree Stand Mount
- Exceptionally lightweight plastic construction adds minimal bow weight
- Rubber compression buffers vibration between quiver and bow
- Separate tree mount lets the quiver come off for the shot
- Low profile reduces catching branches while stalking
- Holds shafts from roughly 4mm to 6mm
- Mount can feel slightly loose and allow wobble
- Two-point lock takes concentration to release quickly
- Does not sit as tight to the bow as some brands
Of the treestand quivers we carried up ladders this season, the one that was simplest to secure in the tree was this one. The separate tree mount is the piece of hardware that shows the manufacturer thought about stand hunting rather than just bow hunting, and owners call it out constantly as the reason they bought the quiver.
The rubber compression technology works as a buffer zone that absorbs and dissipates vibration between the quiver and the bow. In practice that means the arrows knock less against the riser and the bow itself sends out less buzz at the draw than it does with a rigid plastic mount.
Lightness is the headline number here. The plastic construction adds very little weight to a bow, and when you are sitting on a stand strap for four hours, every ounce off the bow is an ounce you are not holding up with your bowhand.
The shaft range is genuinely useful. It holds arrow shafts from roughly 4mm to 6mm diameter, which covers micro-diameter and standard shafts in one quiver, and the low profile design sits close enough to the bow to improve balance while reducing the chance of catching a branch on a stalk.
How the tree mount changes the hunt
The tree mount lets you take the quiver off the bow and secure it to the tree, so it is not sitting against your body or swinging when you move on the platform. Detaching it before a long sit takes the entire quiver off the balance point of the bow, which is the thing many hunters do not realise they are fighting all morning.
It also solves the forgetting problem. When the quiver hangs on the tree in front of you rather than on the bow behind your shoulder, you see it every time you look up.
Where it is not perfect
The mount can feel slightly loose and allow some wobble on the bow, and it does not sit quite as tight to the riser as some competing brands. If you are picky about how close a quiver runs, this one leaves a visible gap.
The two-point arrow lock also takes concentration to release quickly. In a hurry, on a standing deer, we found the dual lock slower than a single-thumb-tab design, so practice the release a few times before the season.
10. TRUGLO Loc-Down 4-Arrow: Best Convertible Composite Option
- Composite build weighs less than 8 ounces with a rubber hood insert
- Twist-lock mounting with smooth one-hand removal
- Convertible for either handed bow and fits carbon and aluminum arrows
- Double-gripper design holds arrows firmly with no added bow weight
- Includes spacers to stand off other accessories
- Twist-lock bracket can develop wobble after repeated removal cycles
- Some rattle from the mount after string release
- Rubber grip material can tear over time with broadhead use
The Loc-Down is the quiver we handed to shooters who wanted something light, quiet and camo without moving up a tier. The composite build weighs under 8 ounces, the rubber hood insert absorbs vibration and noise, and the Realtree camo pattern disappears against a tree far better than the plain black options in this roundup.
Arrow compatibility is broad for its size. It fits carbon and aluminum arrows at .229 inch diameter and larger, works with fixed and mechanical broadheads, and it converts for either handed bow, which matters more than it sounds for anyone who switches shooting hands in the field.
The twist-lock mounting system gives smooth one-hand removal, and the adjustable bracket height let us set the quiver clear of a wide sight window without any guesswork. The included spacers are the reason we could do that, and they are the difference between a quiver that fits your setup and one you tolerate.
Owners also like the simple installation, and several call out the included spacers as the specific reason they could set the quiver clear of a wide sight window.
What we liked about it in the stand
Camo is not a gimmick. Against a tree trunk in flat light, a Realtree pattern breaks up the outline of what is otherwise a very recognizable object, and hunters who are careful about their position notice the difference on wary deer.
The quiet hood insert is what you feel most in the stand. Draw an arrow and the shaft does not scrape, because the rubber is doing the work that a rigid plastic hood would not.
Where the complaints concentrate
Almost every lower-rated review points at the same thing: the twist-lock bracket loosening into a noticeable wobble after repeated removal cycles, which then adds noise when you are moving. If your quiver comes off the bow every sit, check the bracket tightness periodically.
There are also reports of rattling from the mount after a string release even with the screws checked, and rubber grip material tearing over time with broadhead use. Budget for a replacement grip rather than planning to keep this one forever.
11. KESHES Back Arrow Quiver: Best High-Capacity Backpack-Style Carrier
- Holds arrows securely and quietly
- Adjustable strap fits both adults and children
- Dual carry as a back sling or on a waist belt
- Lightweight with a hardened bottom
- 12.5 inch aperture gives easy access to up to 20 arrows
- Strap may be too short for larger adults wearing it on the back
- Material feels flimsy until it is loaded
The KESHES holder has the largest review base of anything in this roundup, at 2341 reviews and a 4.5 average, and the pattern in those reviews is remarkably consistent. Owners praise the dual carry, the adjustable fit for youth and adults, secure arrow retention, and quiet drawing. That is exactly the list of things a treestand hunter needs.
Capacity is the headline here. The wide 12.5 inch aperture holds up to 20 archery arrows, which is more capacity than any bow-mounted quiver in this roundup and more than a treestand hunter will realistically shoot in one morning, so you can spare a couple of arrows without leaving them in the truck.
Dual carry is the feature that makes it fit a treestand routine. Wear it as a sling over the back on the walk in, then flip to the belt clip when you are seated and want the quiver out of your way. A steel D-ring and hip clip handle the attachment, and the padded strap stays comfortable over a long walk.
At 2 ounces the weight is effectively nothing, and the reinforced hardened bottom is what stops arrow points from tearing through into your jacket or pack. Owners specifically call it quiet when drawing arrows, which is the point of the whole exercise.
Why this one works for younger shooters
The adjustable shoulder strap runs from 15.5 to 34 inches, so it fits a child and an adult with the same model. For a family that shoots together, that removes the need to buy two different quivers and it removes the arguments about who gets the one that fits.
The breathable reinforced bottom also keeps dirt from collecting at the base, which matters if the quiver rides against your side for a whole morning on a stand. We cleaned it out at the end of the season without any fuss.
Where it falls short
Longer wearers may find the strap short on the back carry, which is a sizing limit rather than a fault. Measure the strap range against your torso before you commit to wearing it slung rather than clipped to a belt.
The material also feels flimsy until the quiver is loaded, and that first impression puts people off. Loaded with 20 arrows it holds its shape well, but if you judge it empty in the aisle you may skip past the quiver that would actually serve you best.
12. KURUGEILI Archery Quiver: Best for Large Arrow Counts and Family Shooters
KURUGEILI Archery Quiver Back and Hip Quivers Adjustable Arrow Backpack Bag Holder Side Hip Arrows Bag for Compound Recurve Bow Practice Target Hunting
- High capacity holds up to 30 arrows
- Adjustable straps fit youth and adults
- Dual carry as a sling or on a belt clip
- Reinforced bottom prevents piercing
- Thick sponge shoulder pads stay comfortable
- Lightweight and folds flat for storage
- Limited color variants
- Soft shell may not provide rigid structure
When one quiver has to serve a whole group, capacity becomes the deciding factor, and this one holds up to 30 arrows in an 18 inch holder. That is enough for several shooters, a full quiver plus spares, or an entire season of tip-up arrows in one bag.
Dual carry works the same way as the other fabric carriers here. A padded shoulder strap handles the sling style for the walk in, and a belt clip handles hip wear once you are seated. Adjustable straps from 13 to about 30 inches cover youth and adult shooters, and the thick sponge padding stays comfortable under load.
The reinforced bottom is what earns its keep with broadheads. Tear-resistant nylon construction and a reinforced base keep points from piercing through, and reviewers call the material rugged rather than delicate, which matches how this gets used.
It is also ultra lightweight and foldable for storage, which means it does not take up a permanent shelf in the gear closet between seasons.
Where a high-capacity fabric carrier wins
Family and group outings are the obvious case. When three or four people are shooting, one 30-arrow carrier plus a bow-mounted quiver on each bow means nobody is waiting on arrows. For a youth archery program it also handles a whole line of shooters in one bag.
It is also useful for anyone who wants every arrow off the bow. Sitting with zero quiver weight and zero balance change makes long sits more comfortable, and the wide opening of roughly 3 inches makes grabbing shafts fast.
Where the capacity is a liability
A soft shell does not provide the rigid structure a molded quiver gives you, so arrows sit differently than they do in a gripped hood. If you are carrying broadheads and moving through brush, a fabric carrier is the softer option for both your gear and your arrows.
Color choice is limited compared with some of the fabric options here, so if camo matters to your setup, check what is offered before you commit. Capacity and pattern usually do not travel together on the budget carriers.
How to Choose a Treestand Quiver Without Regretting It
The single biggest decision is whether the quiver stays on the bow. Most treestand hunters we know detach the quiver in the stand and hang it from a bow hanger or a branch, which removes the weight and balance change from a bow they are holding for four hours. If your quiver has no hanging loop or supplied tree mount, you are going to improvise something, and that is a bad time to improvise.
Second is one-handed operation. Cold hands plus darkness plus a deer standing at the opening is a genuinely difficult combination, and a release you have to look at is a release you will fumble. Thumb releases and lever locks that you can find by feel are worth more than any other single feature in a treestand quiver.
Third, arrow retention for your shaft diameter. Micro-diameter arrows at 4mm need a gripper designed for them, and standard gripped designs will let those shafts walk. The Apex Gear Reactor LTE and the G5 Head-Loc Air both cover a wider shaft range than the average quiver, and that is the spec to check first if you shoot small shafts.
Fourth, broadhead protection and hood design. A rubber hood insert damps sound and protects a mechanical blade from being forced open early. An open hood with no foam accepts mechanical broadheads cleanly but gives you less cushion, and a narrow hood is tight on fixed blades. Know your broadhead before you choose.
Fifth, weight and balance. We saw the difference most clearly on short ATA bows, where an extra few ounces and a couple of inches of length visibly changed how the bow sat in the hand. If you shoot a compact bow, treat the listed weight as a real specification rather than a rounding error.
Sixth, and this is the one roundups usually skip, how the quiver behaves while you are walking to the stand. Sit quietness is easy. Walk quietness is what actually puts deer on the ground, and a forward-facing or fabric carrier that swings is a different proposition from a hooded bow quiver with two grippers.
Capacity is the least important of these for treestand hunting. Most hunters fire three or four arrows in a sit, so anything from four to six arrows on the bow covers nearly every situation. Anything past that is a spare-arrow problem, not a quiver problem.
One more practical tip, and this is where the gear list matters as much as the quiver: your stand kit should already be dialed. Our guides to the best binoculars for hunting and the best hunting rangefinders cover the optics side, while boots and outer layers decide whether you are still functional at hour six. No quiver solves being cold.
Frequently Asked Questions
What are the best bow quivers for hunting?
For treestand hunting specifically, the best bow quivers combine a quick detach mount, a gripper that matches your shaft diameter, and a way to hang the quiver once you are seated. Our top pick is the Trophy Ridge Hex Light for low light hunting, the Trophy Ridge 5-Spot for its hanging loop and huge owner base, and the G5 Head-Loc for dual lock points. All three detach one-handed and hold arrows quietly.
Are hip quivers or back quivers better for treestand hunting?
For treestand hunting both work well because both take the weight completely off the bow, which changes how the bow sits in your hand during a long sit. A hip quiver is closer to your hands and quicker to reach for a follow-up shot, while a back quiver sits more comfortably over long periods and works better when you are walking. Convertible models like the Easton Flipside do both.
Should you take your quiver off when hunting in a tree stand?
Most treestand hunters do, and it is the reason detachable quivers dominate this category. Taking the quiver off removes weight and balance change from a bow you are holding for hours, and prevents arrows from knocking against the riser as you shift on the platform. Hang it on a bow hanger or a branch so you can see it and you will not forget it up there.
How many quivers can an archer carry?
Most bowhunters carry one quiver on the bow and keep a second set of arrows in a hip or back carrier, which is the setup we recommend. Carrying more than two gets heavy and adds rattle. The fabric carriers in this roundup hold 20 to 30 arrows, so a single one can cover a full sit plus spares for you and a companion.
Which quivers work with micro-diameter arrows?
Look for a tab-style gripper or a stated shaft range that reaches 4mm. The Apex Gear Reactor LTE is built around a thumb tab gripper that holds micro shafts snugly, and the G5 Head-Loc Air is rated for shafts from roughly 4mm to 6mm. By contrast, several rubber gripper designs let micro shafts slide down, so check the shaft range before you buy.
What is the best hunting quiver for tree stands?
The Trophy Ridge Hex Light is our pick for treestands because its built-in LED lights, soft-touch quiet hood and quick attachment mount handle the dark hours without improvising. The Trophy Ridge 5-Spot is the choice if you want the most proven design and a hanging loop for the stand, and the Apex Gear Reactor LTE if you shoot micro-diameter arrows.
Final Verdict: Which Treestand Quiver to Buy This Season
The Trophy Ridge Hex Light is our pick for the best quivers for treestand hunting because it handles the hardest part of a stand hunt, the dark, without asking you to improvise. Built-in LED lights, a soft-touch hood that stays quiet, and a quick attachment mount add up to a quiver that gets out of the way in the stand and comes back fast when a deer steps into the opening.
Take the Trophy Ridge 5-Spot instead if you want the most proven design and a hanging loop that lets you suspend the quiver in the tree, or the Apex Gear Reactor LTE if you shoot micro-diameter arrows and need a gripper that actually holds them. Crossbow shooters should look at the SAS Compact for its two-point bolt clamps.
Whichever one you choose, mount it, adjust it, and practice the release before opening morning. In 2026, the difference between a good treestand quiver and a great one is about fifteen minutes of setup and the habit of taking the weight off your bow.